Shanghai Xinzhuang Instrument Co., Ltd. The LNB brand biochemical incubator is widely used in the cultivation and preservation of bacteria, molds, microorganisms, and tissue cells as well as water quality analysis and BOD testing. It is suitable for breeding experiments and plant cultivation. It is an important test equipment for scientific research institutions, universities, production units or department laboratories in the fields of biology, genetic engineering, medicine, health and epidemic prevention, environmental protection, agriculture, forestry, animal husbandry and other industries.
The use of biochemical incubators and debugging:
1. Open the door and place the object to be handled on the shelf in the box and close the door.
2. Turn on the power, insert the three-pin plug into the power socket, and place the power switch on the panel in the “on†position. At this time, the instrument will appear with a digital display, indicating that the device has entered the working state.
3. Set the temperature in the box you need by operating the temperature controller on the control panel. When the set temperature is more than 5°C above the ambient temperature, place the cooling switch at “RT+5°Câ€. (Detailed operating instructions for temperature controllers are provided on the next page.)
4. When the instrument starts working, the temperature in the chamber gradually reaches the set value. After the required processing time, the processing is completed.
5, turn off the power, after the box temperature close to the ambient temperature, open the door, remove the object of the biochemical incubator installation and commissioning 1, transport attention not to force on the glass, do not hit the box. Do not invert and tilt more than 45°.
2. After the equipment is grounded, it should be placed as smooth as the ground should be corrected.
3, please do not use the instrument in direct sunlight or hot and humid places, use the ambient temperature is maintained at 10-30 °C.
4. This equipment should be far away from sources of electromagnetic interference, and should be effectively grounded.
5. When the equipment is in normal operation, placing the contents in the box should not affect the air circulation to ensure the air circulation and temperature uniformity in the box.
6, the power supply is AC 220V50HZ, must use 10A three-pin socket, and a reliable grounding line, not to use two-pin socket.
The use of biochemical incubators and debugging:
1. Open the door and place the object to be handled on the shelf in the box and close the door.
2. Turn on the power, insert the three-pin plug into the power socket, and place the power switch on the panel in the “on†position. At this time, the instrument will appear with a digital display, indicating that the device has entered the working state.
3. Set the temperature in the box you need by operating the temperature controller on the control panel. When the set temperature is more than 5°C above the ambient temperature, place the cooling switch at “RT+5°Câ€. (Detailed operating instructions for temperature controllers are provided on the next page.)
4. When the instrument starts working, the temperature in the chamber gradually reaches the set value. After the required processing time, the processing is completed.
5, turn off the power, after the box temperature close to the ambient temperature, open the door, remove the object of the biochemical incubator installation and commissioning 1, transport attention not to force on the glass, do not hit the box. Do not invert and tilt more than 45°.
2. After the equipment is grounded, it should be placed as smooth as the ground should be corrected.
3, please do not use the instrument in direct sunlight or hot and humid places, use the ambient temperature is maintained at 10-30 °C.
4. This equipment should be far away from sources of electromagnetic interference, and should be effectively grounded.
5. When the equipment is in normal operation, placing the contents in the box should not affect the air circulation to ensure the air circulation and temperature uniformity in the box.
6, the power supply is AC 220V50HZ, must use 10A three-pin socket, and a reliable grounding line, not to use two-pin socket.
7. Don't put the power cord close to the back, and don't let the instrument or other items press on the power cord, so as not to damage the power cord.
Shanghai Xinzhuang strives for survival by quality, technology for development, management for efficiency, and service for reputation. Welcome new and old customers!