1. Choosing copy paper: The quality of copy paper plays a crucial role in the “paper jam rate†of the copier and even its service life. Please do not use paper that has the following symptoms
(a) The same paper is uneven in thickness, varies in size, and even has defects.
(b) The edges of the paper are rough.
(c) Too much paper, leaving a layer of white shavings after shaking on a clean table. Too much copy paper on the paper will cause the pickup roller to be too slippery, so that it will not pick up the paper, accelerate the wear of the photosensitive drum, the fixing roller, and so on.
2. Use the carton evenly: it sounds contradictory to the next one. However, if the two cartons are next to each other, the rotation can prevent excessive wear of the paper pick-up system of a paper path.
3. Use the nearest carton: The closer the paper is to the photoconductor, the shorter the distance traveled during the copying process, and the less chance of “jamblingâ€.
Method 1. Shake paper: Shake the paper on a clean table and then repeatedly align it to reduce the paper hair.
Moisture-proof, anti-static: The damp paper is deformed after being heated in the copier, causing “jamâ€, especially when double-sided copying. The weather in autumn and winter is dry, and it is easy to generate static electricity. The copy paper often sticks together two or three sheets, causing “jam paperâ€. It is recommended to place a humidifier near the copier.
Method 2. Self-cleaning: If the “paper jam†phenomenon that the copy paper does not come up often occurs, you can wipe the pickup roller with a piece of wet absorbent cotton (do not rub too much water).
Method 3. Elimination: When copying an original with a darker background, the copy is often fanned to the paper exit of the copier. By using the erasing function of the copier, the probability of "paper jam" can be reduced.
Method 4 Regular maintenance: Comprehensive cleaning and maintenance of the copier is the most effective means to ensure the copying effect and reduce the "jam". Regular maintenance is also the basic responsibility of the copy machine warranty unit.
If “jam†occurs, remind you to pay attention to the following points when taking the paper: When “jam†is taken, only the parts that are allowed to move in the copy machine manual can be pulled. Remove the whole paper as much as possible, taking care not to leave the broken paper in the machine. Do not touch the drum to avoid scratching the drum. If you are sure that all the “paper jams†have been cleared, but the “paper jam†signal still does not disappear, you can turn off the front cover again, or switch the machine power once.
Source: Internet
WUXI MIFUN INTERNATIONAL TRADE CO.,LTD , https://www.mifunblinds.com