Step 1: Select wax
Select the correct wax. You can choose a specific temperature wax that matches the weather conditions in the area where you will be skiing, or a universal wax with a wider range of temperatures and conditions. If you don't care about speed or don't understand weather conditions, this will be a good choice.
Step 2: Adjust the skis
Select a location to adjust your skis, such as on a bench or a pair of sawhorses. Make sure that your adjusters are fixed in the work area and make sure they are placed outside the ski holder so that the skis remain stable when you are debugging. Fasten your skis and adjusters so that the base that touches the snow faces up.
Step 3: Set up the workspace
Place your waxing iron near the skis and set the temperature according to your wax pattern. Then, place a piece of cloth, paper, or newspaper on your work area to protect the floor from the scattered wax.
prompt:
If you are using a specific wax, check the exact temperature of the wax on the packaging instructions to select the correct iron temperature. If you use universal wax, set the iron temperature to medium heat, approximately 230 degrees Fahrenheit.
Step 4: Clean the base
Wipe the base with a base cleaner and a paper towel. Then wipe the ski with industrial alcohol and a towel to remove the cleaner.
Step 5: Melt the wax
Place the iron vertically on the pedestal, then apply a layer of wax to the iron and allow it to melt and drip onto your base, ensuring that the wax covers the entire length of your skis.
prompt:
Too much wax on the base means that afterwards you will have to scrape off the excess wax, so drop the wax every 2 inches.
Step 6: Waxing wax
Place the iron on the base and start moving the iron from head to tail. Repeat the above steps until the wax is completely melted and evenly distributed, covering the entire base. Keep the iron moving all the way. If it stays in a place too long, it can destroy your base material.
Step 7: Dry
Dry the wax and cool the skis so that the wax penetrates into the base. For most waxes, it should be aired about one hour, but it's best to let it dry overnight.
Step 8: Scratch skis
After drying, forcefully remove the excess wax from the board, start from the beginning, and force the scraper toward the tail of the ski. Scratch the skis along the length of the ski until no more wax is blown. Clean the skis with a towel.
Step 9: Brush Snowboard
Use your steps when scraping the skis and brush them several times from the beginning to the end until you can see shallow grooves at the bottom of the snowboard. This allows the skis to slide without sticking to the snow. You are now ready for skiing!
do you know:
Waxing regularly will not only make your skis move smoothly and quickly, but it will also protect your pedestal and make your skis last longer.
Plastic Slide
About the plastic prepared Microscope slides, we have 4 colores for choosered ,yellow ,green ,blue which have 12 types each colores.Includes 48 specimens of animals insects plants. Get children excited about science by viewing these microscope prepared slides under a microscope.Labeling provides specimen identification. These slides are well labeled with name and drawing. Kids can easily identify what they are observing.The slides are made of acrylic material without sharp edges. They are safer for kids to use than glass slides.This slide set is good for educational purpose for kids, entry-level students or home school programs. Mostly recommended for kids age 5 years and up.
Plastic Slide,Small Plastic Slide,Plastic Slide For Sale,Pre Prepared Microscope Slides
Xinxiang Vic Science&Education Co.,Ltd. , https://www.labmedicalscience.com