[ China Wardrobe ] In the south, there will be a period of rainy and rainy weather every year. The air humidity is too high, causing the furniture inside the house to be moldy. What should I do if the wardrobe is moldy? Let's take a look at the cause and treatment of the wardrobe.
3 reasons why the wardrobe is moldy:
1, the room is heavier, the board is mildewed after damp
2, the quality of the board itself, moldy after renovation
3, paint quality and technical problems, moldy after renovation
Moisture proof: It is best to deal with the wardrobe problem fundamentally. There are two possibilities for excessive moisture in the wall: First, it depends on the external wall, because the wall is poor in water resistance, and it seeps in the rain. The second is the wall of the bathroom (bathroom decoration renderings), the bathroom is inseparable from the water, the humidity is relatively large, and the poor waterproof performance of the wall will affect the furniture in the next room. If it is the reason for these two reasons, it is recommended that you treat the wall surface, brush the wall with a waterproofing agent and then attach the tiles.
Moldy treatment of the wardrobe:
1. Wipe clean and moldy places. When we see mildew in the closet, we must first clean up the moldy area. Generally, wipe it off with a dry paper towel, or brush it with a dry brush to clean the moldy area. If the cleaning is not clean, you can wipe it with a damp cloth, and it is often very convenient to remove the mildew.
2, deal with the place where the mold has been sent. If you find mold, in addition to cleaning the mold with a cloth, we need to brush the varnish again, so that it can effectively prevent further mold. Moldy is mostly caused by the problem of paint, so we can also use the rain forest to clean, then wipe it with a clean cloth.
3. Control the humidity of the room. The air is damp and prone to mold, so we can put some quicklime in the house, not only can effectively prevent moisture, but also have the effect of disinfection. If the moisture in the closet is too heavy, you can put a tungsten light bulb in the closet and open it when it is wet. It can effectively reduce the moisture in the closet and keep the closet dry.
4. Keep the inside of the closet dry. After moldy mold enters our home, it will cause some respiratory diseases. In order to prevent this, you can put some desiccant in the closet, which can absorb the excess water in the closet and make the wardrobe more dry. At the same time, we can put some orange peel in the closet, which can also play the role of clear and environmental protection. At the same time, we should pay attention to the frequent ventilation and ventilation. Try not to use the humidifier indoors to prevent excessive moisture and affect the use of the wardrobe. . After we have used the wet mop to finish the ground, we should also pay attention to opening the window to allow the water to dry effectively.
Threaded Fasteners,Metal Fasteners,Stainless Steel Fasteners,Stainless Steel Bolts
JESSO HARDWARE , https://www.china-jesso.com