[ Zhonghua Wardrobe ] Many people now like to buy online. When buying wardrobes , they usually send back the parts of the wardrobe. At this time we need to know how to combine them. Then the following small series to introduce you to the combination wardrobe installation method, I hope to help you!
The installation of the combination wardrobe is generally not too complicated. In order to let the customer know clearly how to install it, the installation steps have been minimized, and the interfaces are also prepared in advance. The user only needs to follow the installation diagram step by step. Pay special attention to the installation sequence and correctly install the components to the appropriate positions.
When installing a combination wardrobe, first make sure the bottom plate is secure. It is very important to lay a good foundation. If the bottom is not secure, the structure of the entire wardrobe will be unstable. When installing, pay attention to the interface to be aligned, install the document, shake it by hand without shaking, the bottom usually has drawers, you can not install first, first determine the frame, reserve the installation space.
After the bottom of the combination wardrobe is installed, install the back panel. Pay attention to keep the back panel and the bottom plate at a right angle of 90 degrees. Do not tilt. It is best to measure it carefully with a measuring tool to avoid errors. After installing the backboard, install the side panel and the top panel of the combination wardrobe. One side of the side panel is connected to the back panel, and one side is connected to the bottom panel. The board and the board are at a right angle of 90 degrees. The top panel is installed on the top of the wardrobe. Pay attention to the interface. Stable, secure it to the top.
Now, the general frame of the combination wardrobe has been established, and finally the remaining parts such as cabinet doors, laminates, clothes rails, clothes trays, drawers, etc. are installed. These combination wardrobe installation drawings are specifically marked, as long as the wardrobe is reserved according to the merchant. Space will be installed one by one.
The installation of the combination wardrobe is not difficult. Generally, the installation instructions will be attached to the parts that are sent back, as long as you follow the above information or install according to the installation instructions on the manual.
Ningbo XISXI E-commerce Co., Ltd , https://www.petspetsproducts.com