The child's cart is the baby's first mount: use it while sleeping, use it when you go out, and even use it when you eat. With such a high utilization rate, safety issues can certainly not be taken lightly! Children's carts are one of the most utilized baby products, and children's homes have at least one cart. Although there are different brands and grades to buy, there is one point that parents are concerned about, and it can be said that it is a prerequisite for purchase: it should be safe first, followed by another.
In the 11 parts of the study, when choosing a stroller, you can examine its safety from the following aspects:
1. Visual inspection and hand-touching methods are used to check whether there are exposed open tubes in the area accessible to the baby, whether there is a dangerous crack and sharp edges, sharp corners, and burrs.
2. The brake lever presses down the brake lever, pushes it forwards and backwards slightly, and observes whether the brake lever trips or slides. In addition, it is best to have a brightly colored mark on the brake levers so that you can avoid accidental stepping during use.
3, the basket to ensure that the cart center of gravity is stable, the basket position should be low, and close to the rear wheel.
4, the fabric to avoid the choice of colors are too bright fabrics, because the more vibrant fabrics add more chemical composition. The fabric part should be able to be removed and cleaned to ensure cleanliness and hygiene during continuous use.
5. The surface of the paint film of the handlebar should be smooth and smooth without peeling, cracking, paint leakage, wrinkled skin and aggregated sand particles. If it is a plastic injection part, the surface should be smooth and flat, and the thickness of the coating should be uniform. There should be no exposed bottom, stain, or color mixing defects.
6. The folding device is repeatedly folded several times to see if the device is flexible and there is no obstacle to opening and closing. To prevent accidental folding of the cart, the folding locking device should require two steps to open and check if the locking device can easily become loose.
7. Seat belts should include at least one set of belts and an ankle strap. The minimum width of the belt and chin strap should be 20mm, and the width of the shoulder strap should be 15mm minimum.
8. The material and paint on the tray plate must meet the safety standards. This point is impossible for ordinary consumers to check, but it is clearly stated in the National Standard for Safety Requirements for Strollers. Therefore, it is safer to buy strollers of well-known brands at regular shopping venues.
9, seat pocket pocket to match the baby's age. The baby under 6 months is best to lie flat in the cart. When selecting, ensure that the stretched "small bed" is flat, there is no obvious bend in the fold, moderate hardness and softness, the minimum internal height is not less than 180mm. Carts with a less than 150° angle between the backrest and the seat cushion are not suitable for babies under 6 months. Umbrella-shaped lightweight carts are not suitable for babies under 10 months because they do not support the backrest.
10, small parts within the reach of the baby, there should be no small parts can be placed in the mouth. For non-detachable small parts, the baby should not be able to pull it with his fingers or teeth. In addition to seat belts, there should be no strings, straps and other narrow strips.
11. Place the wheelbarrow on a flat surface to see if it can be placed in a stable position (the wheel should be less than 5mm). Push the line straight and test if it deviates from the straight line. Push the “∞†shape to push it to see if the wheel rotation is flexible.
(For more information on stroller, please pay attention to China Baby Vehicle Industry Network)
Ningbo Smile tools Co.,ltd , https://www.nbsmiletools.com