Water park equipment, like indoor swimming pool equipment, is simple and mature, so it is often designed to ignore this detail. In China, although many indoor swimming pools use advanced imported equipment. However, because of the neglect of many details, the effect is not ideal after use. So what are the problems that are common in water park equipment during construction? Let's talk about it together.
There are many pipes in the swimming pool, which should be treated reasonably. At present, there are two kinds of ideal pipes, one is UVPC pipe, and the socket is bonded. The advantage is that the construction is light and light, and the disadvantage is that the interface is not resistant to temperature; It is a thin-walled copper pipe. This pipe is reliable in welding and has stable water quality. It is not easy to scale on the inner wall of the pipe, but the cost is high. The heating system should have reliable temperature control devices. If the circulating water filtration system with high water pressure uses copper pipes, other U VPC pipes will be more ideal, such as swimming pools on the floor or metal pipes. UPVC pipes must be solid and reliable; otherwise, they will shake when under pressure.
2. How to absorb the bottom of the pool
There are many ways to clean the bottom of the pool: using a brush to move toward the suction port, this method is simpler, but the effect is not good, because the brush will also disturb the sediment; it can also use siphon or pump to clean the dirt, this method It is necessary to move the suction tray in the pool , the operation is inconvenient, and the water loss of the pool is also large; it is ideal to use the circulation system to add the suction head to achieve the bottom suction. The advantage of this method is that the existing system is used, and the additional equipment is less. Secondly, the suction device, the hose and the push rod are all plastic products, and the operation is very light; in addition, the dirt at the bottom of the pool is effectively intercepted in the sand tank, and the effect is good.
3. Water quality
Urban tap water can not meet the water quality standards of swimming pools, and needs further treatment. The practical application shows that the treatment with alum is not ideal. First, the required sedimentation time is long, and second, there are many sediments; it is necessary to inject a certain proportion of new water every day , otherwise it is often added. copper sulfate and other agents, the water will still be a period of time after the wall moss green; water-filled pool preferably, the balancing tank level control, often overflowing portion of the surface water, because the water contains a small amount of grease, the non-water-filled The swimming pool, the top of the pool wall will form a black belt along the water surface; the water treatment circulation system should ensure a certain flow; otherwise, the treatment effect is poor, the pool is prone to dead angles, and the heating speed is also affected.
4. Decorative materials
Since a large pool indoor humidity, a variety of decorative materials should be carefully chosen, it is appropriate light marble or tile wall without coating or paint is appropriate, the use of ground Fanghuadezhuan, avoid the use of granite; ceiling plate of aluminum or aluminum is appropriate Plastic panels, avoid using wood materials. The design of the roof grid should consider two points: First, the grid should be easy to anti-corrosion treatment in the future, stainless steel grid can be used in the high-end swimming pool; second, the grid glass should be able to be cleaned, especially on the side of the road , and the large-area glass is very easy to collect dust. . Stainless steel products are applied to the inlet and outlet of the underwater part, ladders, etc.; the overflow gutter cover is usually made of plastic grille, but this kind of grill cleaning is very difficult.
5. Sand tank
The imported sand tank is made of carbon steel, cast iron, glass fiber reinforced plastic and other materials.
a. Multi-way valve operation should be simple, generally the handle can be rotated by 180 degrees to change the working state.
b. Multi-way valve should be sealed and reliable, that is, there should be no leakage under normal working conditions, and imported products also have quality difference.
c. Import and export pressure gauge to master the timing of backwashing
d. There should be inspection holes in the upper part of the sand tank for maintenance and sanding
e. Valves should be added to facilitate the maintenance of water inlet and outlet pipes
f. sand tank does not have to consider spare
g. Sand tank backwash pressure must be guaranteed
Rf Beauty Machine,Rf Skin Rejuvenation Beauty Machine,At Home Skin Tightening Devices,Radio Frequency Skin Tightening Machine
Guangzhou serika Technology Co., Ltd. , https://www.serikamedical.com