[ Chinese wardrobe network ] With the continuous improvement of people's living standards, more and more people have a deeper pursuit of home decoration, even the wardrobe is no exception. With its custom-made and stylish personality, the built-in wardrobe has become the first choice for many young people in the design of wardrobes. Even though the built-in wardrobe has many advantages, it is a headache to mention the installation of the built-in wardrobe. Installing a built-in wardrobe is a technical activity, and it is difficult to install it once in a strict manner. Let's let Xiaobian introduce you to the embedded wardrobe installation steps in detail, so that more people can understand how to install the built-in wardrobe!
The installation procedure of the built-in wardrobe is mainly divided into two parts: the installation of the backboard and the installation of the cabinet.
Back installation:
1. First confirm the installation position of the built-in wardrobe with the back panel, and then use the peripheral board to fix it. For different shapes, there are different methods for fixing the back plate, depending on the actual situation.
2. Next, assemble the backboard, firstly align the cabinet, and measure the diagonal of the cabinet with a steel ring at a relatively horizontal angle. The back plate is fixed by nails.
Cabinet installation:
3. Before the cabinet is officially installed, a layer of cloth should be laid on the floor to prevent the cabinet connection from being lost. Another convenience is to ensure that the floor is not scratched. First assemble from the layer on the wall, put a layer on the ground flat on the ground, and load the three-in-one connector that was prepared beforehand. During this period, please pay attention to check whether the hole spacing is consistent with the design drawing. After confirming the match, install the three-in-one single link.
4. The installation process of the cabinet is usually from the middle to the periphery. Each board will have a screw hole. Just insert the screw hole prepared beforehand into the hole, then load the eccentric into the eccentric hole. Tighten the hour hand.
5. When the cabinet is installed, it is often encountered that the cabinet body has a blank position. After the internal structure is installed, some items are placed on the bottom to be padded, and then the external board is installed.
6. Install the door rail on the top and bottom of the wardrobe. The material of the door rail selection alloy is better, light and firm.
7. The final step is to carry out a simple inspection of the built-in wardrobe, gently shake the cabinet to see if it is firm and the details are in place.
The above is a detailed introduction to the installation steps of the embedded wardrobe. In fact, the installation of the embedded wardrobe is not difficult. Just follow the steps step by step and you can complete it quickly. I hope that it will help you in the actual operation.
Pet food is divided into: dry pet food, such as: fish food, dog food, cat food, leisure snacks; semi-dry pet food, such as: pet canned food, homemade dog food, cat food; pet liquid food, such as : Pet meat sauce, pet nutrition porridge, etc.
According to the purpose of pet food, it is divided into: pet diet, diet companion, pet health food, pet treat, prescription food and so on.
Pet Snack,Satisfy Desires Dog Can,Oem Dog Snacks,Delicious Pet Snack
DongGuan Lucky Pet Products Co., Ltd. , https://www.dgpetproduct.com