After using the PS version/CTP plate processor for a period of time, the internal liquid tank is prone to crystallization and scaling, especially in the case of relatively hard water. The crystallization inside the processor can be washed with dilute hydrochloric acid. This article will introduce you to the supplier of Masidwei.
Under normal circumstances, about 20 minutes after the plate machine is turned on, the development temperature can reach the set value, and the work requirements are gradually and steadily achieved. For a long time after the start-up, the development temperature has not been able to reach the set value, and the operation panel is "DEV TEMP LOW", and the platen machine cannot work under normal conditions. Another situation that arises from this is that the gluing barrel is quickly filled with blue liquid and diffused. It is often necessary to arrange some empty barrels to replace the gluing barrel to prevent liquid from leaking out onto the floor.
After the problem with the plate machine, the first thing that comes to mind is to check if the processor cycle system is working properly. After turning on the power, put your hand on the circulation system, there is a strong sense of shock, and there is also a fever, indicating that the circulation system works under normal conditions. The second is to check if the temperature sensing probe is working properly. Using a multimeter to detect, the scanner sensor is normal. Then check if the heating rod of the processor is burnt out. After replacing the heating rod, if there is still a malfunction, there is no problem with the heating rod of the processor.
Whether the parts of the platen machine are damaged due to transportation, if any, immediately make a corresponding record and take pictures of the damaged part, and contact the carrier or supplier in time. A 4 minute tap water pipe should be connected to the equipment room. The height of the machine room drain should not be 150mm higher than the floor space of the platen machine. In order to facilitate the cleaning of the roller shaft and other parts, a properly sized pool should be provided in the equipment room.
Article source address: http://
Stainless Steel Chafing Dish,Chafing Dish Buffet Set Costco,Round Stainless Steel Chafing Dish,Stainless Steel Chafing Dish With Roll Top Lid
Jiangmen Junerte Stainless Steel Kitchenware Co.,Ltd , https://www.jmjetkitchenware.com