How to repair automatic umbrella

Umbrellas on the umbrella wholesale market, especially umbrellas, umbrellas for advertising, umbrellas for advertisements, etc., have evolved from the pursuit of practicality to the pursuit of fashion and become decorations for people, especially women. Of course, inevitably it is easy to break. It's a small problem. It's a pity to throw it away. Here's a few ways to repair your umbrella.

1. Umbrella and rod separation. When the automatic opening of the umbrella, due to the elastic force of the spring, the fixing pin is broken, so that the umbrella and the rod are separated.

Repair method:

1 Replace the T-shaped pin and replace it with a flat iron, as in the case of the original pin. When loading the pins, the upper section of the umbrella pole shall be oriented and flattened, the pins shall be mounted on the round holes of the two handle shafts, and the umbrella pole shall be advanced so as to pass the inner convex sockets, and then the inner convex sockets shall be restored. Close the umbrella and click on the beginning. The umbrella can be opened in sections and it will open automatically. Repeated several times without separation, it will be repaired.

2 With a diameter of one millimeter of wire, with reference to the original, folded and bent into a T-shaped pin, it can also be used on behalf of. Note that the bend must be clamped. The entire pin must not be over the groove of the lever, otherwise there will be resistance when the umbrella is opened. Beyond the local available small trowels, the installation method is the same as described above.

2. Fix the pin hole of the pin so that the pin and umbrella slide out of the rail. When this failure occurs, the T-pin is generally complete and still available. Repair method: At the smooth opening of the round hole, add a thin copper piece, secure it with soldering, use a trowel to repair the groove, and insert the T-shaped pin into the round hole. After the replacement, try repeatedly and open it several times to correct it.

3. Hang groove sliding mouth. Automatically controlled switch hooks can not be fixed after closing the umbrella, and often open the umbrella automatically. Repair method: In the middle of the hook, open a gap with a knife, and look like it when you close the umbrella. When you open the umbrella, it will be automatic. The gap will be made by the small one and you will try it until it is suitable.
Umbrella information, umbrella industry, more information, please pay attention to China Umbrella Industry Network

Men`s Bags

Mens Bags,Mens Money Clip,Mens Designer Bags,Men'S Shoulder Bags

Dongyang Bestway Leather Co.,Ltd , https://www.aurorafashion-cn.com

Posted on