The reason why the ribbon is wrinkled when printing on the micro printer: the pressure on both sides of the printer is unbalanced or the pressure is too high. Solution: Adjust the screw button to reduce the pressure and adjust the pressure balance on both sides. After using the micro printer for a period of time, the label content when printing Always biased up or down, printing with a new machine is normal, the reason: the printer has been used for a long time, the sensor has an error, the solution: according to the specific offset situation, adjust the upper and lower position of the sensor.
Unclear printing reasons: The print settings are not set or the print head is dirty. Solution: first check if the print head is dirty, clean the print head, then set the print temperature or try another font (font bold) If it doesn't work, it may be that the quality of the print ribbon or label paper is too bad, and the ribbon and label paper are replaced.
Micro-printer is not clear when printing and black line appears Cause: The print head is dirty or the print head is broken. Solution: Clean the print head first. If not, only the print head can be replaced. When printing labels, there are always some words that cannot be printed. : The print head is dirty and the typesetting is wrong. Solution: Clean the print head, and see if the words to be printed are overlapped during the typesetting, and the layout is re-typed.
When printing, the side is clear, while the reason is blurred: the pressure of the micro-printer is unbalanced. Solution: There is a screw button on the top of the print head to adjust the pressure of the unclear one. On some machines, There is only one screw button to adjust, but you can move freely, then move it to the unclear side and increase the pressure.
The font is clear when printing, the barcode is not clear. Reason: The barcode content is too much, the density is too small. Solution: Shorten the barcode content or increase the barcode density. For 200dpi and 300dpi machines, the barcode density is generally above 7mils, ie the scale factor. To be 2 or more, the barcode printed by the micro printer is clear.
Unclear printing reasons: The print settings are not set or the print head is dirty. Solution: first check if the print head is dirty, clean the print head, then set the print temperature or try another font (font bold) If it doesn't work, it may be that the quality of the print ribbon or label paper is too bad, and the ribbon and label paper are replaced.
Micro-printer is not clear when printing and black line appears Cause: The print head is dirty or the print head is broken. Solution: Clean the print head first. If not, only the print head can be replaced. When printing labels, there are always some words that cannot be printed. : The print head is dirty and the typesetting is wrong. Solution: Clean the print head, and see if the words to be printed are overlapped during the typesetting, and the layout is re-typed.
When printing, the side is clear, while the reason is blurred: the pressure of the micro-printer is unbalanced. Solution: There is a screw button on the top of the print head to adjust the pressure of the unclear one. On some machines, There is only one screw button to adjust, but you can move freely, then move it to the unclear side and increase the pressure.
The font is clear when printing, the barcode is not clear. Reason: The barcode content is too much, the density is too small. Solution: Shorten the barcode content or increase the barcode density. For 200dpi and 300dpi machines, the barcode density is generally above 7mils, ie the scale factor. To be 2 or more, the barcode printed by the micro printer is clear.
Gel Builder,Bio Builder Gel,Builder Gel Polish,Glossify Builder Gel
GuangZhou CCO Cosmetic Co., Ltd , http://www.nailcocome.com