The amusement equipment must require safety standards. What are the safety standards and equipment specifications for amusement equipment industry? Let's take a look at the safety equipment industry safety standards and equipment specification analysis with this company:
Safety insurance measures The rider’s part of the airborne rides should be solid and reliable, and important parts and components should adopt insurance measures.
The number of steel ropes or chains used for hanging passengers must not be less than two. In connection with the seat part, it must be considered that a balance can be maintained when disconnected.
Doors that close the cockpit more than 1m above the ground must be equipped with two locking devices or a locking device with insurance that cannot be opened inside. Barriers to the entrance and exit of unclosed cockpits should also have locking devices with insurance.
When the amusement ride is in operation, when the power supply suddenly loses power or the equipment fails, which endangers the safety of the passengers, an automatic or manual emergency parking device must be provided.
In the event of a failure in the operation of amusement facilities, there should be measures to ease passengers.
Passenger restraint device When the ride is in operation, the passenger may be moved, bumped or thrown or slid out of the vehicle. For larger risky amusement facilities, two sets of independent restraint devices should be considered when necessary. Seat belts, safety levers, levers, etc. can be used.
Tethering device: It should be reliable and comfortable, and the parts that are directly in contact with people have appropriate softness. The design of the restraint device should prevent pinching or crushing of a part of a person's body. It should be easy to adjust and operate.
Seat belt: It can be used alone for facilities that are slightly swaying or have slower speeds and are not flipped out. The seat belts are generally equipped with auxiliary handles. For sports facilities, seat belts can be used as an auxiliary restraint device.
Safety Clamp: When the amusement ride is running, it may lead to danger of being thrown out by people. A corresponding type of safety pressure bar must be set; the safety pressure bar itself must have sufficient strength and locking force to ensure that the tourists are not thrown or Drop it and stay locked until the device stops running.
Safety fences and platform safety requirements The security fences should be set in and exported separately, and guide fences should be set at the entrance. Platforms should have anti-skid measures.
The opening direction of the security fence door should be the same as that of the passenger (except in special cases). To prevent injury to the hands of the person when the door is closed, the gap between the door frame and the column should be appropriate, or take other protective measures.
While running and riding people's rides, the passengers' entrance and exit should not exceed 300 mm of the platform. The height of the entrances and exits of other amusement facilities that ride on people’s part should be convenient.
Other safety requirements Amusement facilities should be equipped with prominent safety signs at the necessary places and locations. Safety signs are divided into four types: prohibition mark (red), warning mark (yellow), instruction mark (blue), and warning mark (green).
Exposed sharp edges, sharp corners, burrs, and dangerous protrusions are not allowed where passengers can touch.
In the culverts passed by amusement facilities, the containment surfaces should be made of materials that are not easy to fall off, and the ornaments should be fixed firmly.
The company's Sports Equipment Co., Ltd. warm reminder: Caring for children's healthy growth, starting from paying attention to children's safety!
Glass Ashtray
Glass Ashtray
Xi'an ATO International Co., Ltd , https://www.xianato.com