On the morning of October 24, Fujian Quanzhou Fuyuan Carton Factory caught fire and a steel structure partially collapsed, but no casualties occurred. Do not want to let the fire patronize, the carton factory remember to do a good job of prevention.
Suyuan carton factory burst fire, causing a steel structure to collapse partially
On the morning of October 24, Fuyuan Carton Factory in Quanzhou Taiwanese Investment Zone in Fujian caught fire. At 10:13, the Quanzhou Fire Brigade received an alarm and dispatched 10 cars and 40 firefighters to the scene. At 11:45, the fire was basically controlled. At 12:03, the open flame was extinguished.
The fire caused a part of the steel structure to collapse, but no casualties occurred. At 13:14, Quanzhou Fire announced that Weibo said that fire is still in the process of further exhausting smoke and cleaning up the site.
According to the netizen broke the news, after the fire, the factory smoked, and black smoke could be seen one or two kilometers away. The black smoke on the scene was more than ten meters high and the taste was pungent. The factory part collapsed.
Then, the amazing thing happened. The video of the fire scene showed that the building collapsed... collapsed...
It is understood that this is a carton factory ready to be demolished. The equipment and equipment inside the factory have been basically relocated, but there are still a lot of foam boards. It is preliminarily determined that some people will cause a fire after the sparks ignite the foam board.
Don't want to let the fire go, the carton factory remembers to do the following work
Carton factory fire accidents are endless, not accidental. The safety and fire prevention of such incidents has been widely concerned by the packaging and paper industry, the fire department and the community.
Carton factories must improve their safety awareness and prevent them.
Then, how can the carton factory reduce the probability of fire occurrence, how to reduce the loss as much as possible in the event of a fire? Here, Xiaobian conducts simple science on fire prevention related knowledge.
In order to effectively prevent the occurrence of fire, it is first necessary to understand the characteristics of the fire, which can be summarized as risk, spontaneous combustion, concealment, suddenness and variability.
There are so many flammable substances in the carton factory. In the event of a fire, the fire spreads very quickly and is difficult to control. Therefore, the economic losses caused by fires are usually large and the fire risk is high.
In addition to the cause of the accident, the carton factory still has a large hidden danger of spontaneous combustion, and this hidden danger is very hidden and difficult to prevent. And fires usually happen suddenly, and the parts and time that occur are characterized by changes. These have made the subsequent timely rescue work particularly difficult.
According to different fire causes, carton factories need to carry out preventive work in a targeted manner. Common fire causes are spontaneous combustion, lightning strikes, and improper installation and use of electrical equipment.
To prevent fire from burning, the following must be done:
1, equipment should be maintained, cleaning work should be strengthened. The machine must not be short of oil, and the machine must always be in the moisture of the lubricant. At the same time, the paper dust, dust, etc. are clean;
2. The electrical circuit of the machine should be checked frequently to avoid unnecessary losses caused by problems such as aging of the line;
3. It is strictly forbidden to bring dangerous goods or flammable products into the workplace, and fireworks and firecrackers are not allowed to be fired in the factory;
4. The operation must be operated according to the operation procedure, and all operations that violate the operation specifications are prohibited;
5, the fire exit should be kept open, do not block, put the fire extinguisher at each control point, and the fire extinguisher should be checked regularly to ensure that it is in good condition;
6. Strengthen fire prevention training and safety education, give employees more awareness on fire prevention, organize more fire drills, and have more experience and more vitality;
7. Strictly implement various rules and regulations to ensure that all indicators of the factory meet safety standards.
Editor in charge: Zheng
Article source address: http://
WUYI YINGYUAN IMP&EXP CO; LTD. , https://www.yingyuandrinkware.com