The same proofing should not only show whether the color is reproduced correctly, but also display dot characteristics, such as whether dot density and dot angle are selected correctly. If it is a mock-up proof produced by the film, it should also pay attention to whether the dot characteristics of the film are appropriate. For digital proofing, because the Rip used can generate dots, this control is not emphasized. Since the resolution is different, it is not easy to grasp the dot generation when using the Rip method once. However, digital proofing has no outlets and has the same value as outlets.
What is true proofing? Can I Simulate Printing Products on Any Color Printer Without Color Management? No one has explained this yet. The Epson 5000 inkjet printer (approximately 5,000 marks) has achieved great success in the proofing field. If cheap equipment can produce the desired result, why buy expensive equipment? Is proofing by Epson 5000 a true proof or a good color print?
It should be said that the color proof bar can only be called proofing if it is printed on the sample proof. However, this requirement has not been met so far. The reason is that the control bar is in other parts and it is uncontrollable to worry about proofing.
Proofing should include control strips. The control strips should at least show the density of the ground, the increase in hue values, and the color values ​​and paper whiteness of the color patches. A good control bar also displays color increments, which Rip to use, whether to use color management, whether to use ICC-Profile, and what data to use for proofing. Currently, Ugra and Fogra are working on this proofing control strip.
What is true proofing? Can I Simulate Printing Products on Any Color Printer Without Color Management? No one has explained this yet. The Epson 5000 inkjet printer (approximately 5,000 marks) has achieved great success in the proofing field. If cheap equipment can produce the desired result, why buy expensive equipment? Is proofing by Epson 5000 a true proof or a good color print?
It should be said that the color proof bar can only be called proofing if it is printed on the sample proof. However, this requirement has not been met so far. The reason is that the control bar is in other parts and it is uncontrollable to worry about proofing.
Proofing should include control strips. The control strips should at least show the density of the ground, the increase in hue values, and the color values ​​and paper whiteness of the color patches. A good control bar also displays color increments, which Rip to use, whether to use color management, whether to use ICC-Profile, and what data to use for proofing. Currently, Ugra and Fogra are working on this proofing control strip.
Fancy Writing Pen,Sample Free Plastic Pen,Plastic Writing Pen
enghua Jade Motor Co., Ltd. , http://www.pen-manufacturers.com