Hot stamping flocking new technology is to cover the flocking transfer printing paper on the fabric printed with hot stamping pattern on top of the fabric for hot stamping, so that the villi transfer paste on the surface of the hot stamping paste, printing glue and flocking can be printed together One of the special effects.
The slurry is a water-based hot-melt adhesive, which can be printed on cotton, chemical fiber, nylon cloth, etc. The paste has a good feel and high fastness after hot stamping.
First, the screen requirements
Wire Mesh: 100-120 mesh, drying water version (Guard net hardened water).
Second, slurry deployment
lO0 flocking hot stamping paste is mixed with 2 parts of No. 30 bridging agent, and the paste can be printed evenly after mixing. Due to the addition of No.30 bridging agent, cross-linking with the glue will gradually occur, so the shelf life of the paste is about 6 hours, and the printing amount should be mastered during deployment.
Third, use scraper
Water-based scraper or polyurethane oily flat blade with a hardness of about 60-65.
Fourth, screen printing requirements
Before printing the paste, it is recommended to print 2 to 3 times with the ordinary glue first, 2 times each time the squeegee is printed and dried half dry, after the last glue printing, do not dry it, then wet the printed flocking hot stamping paste. , baking half dry and then print once. The paste is hot-stamped when the surface is 7 to 8 dry and has the best fastness. Note: Flocking hot stamping paste should be flocked with flocking paper within 6 hours after printing to prevent the slurry from automatically producing cross-links due to too long drying time, which will affect the fastness of hot stamping.
Fifth, hot stamping requirements
l. Hot stamping requirements: Hot stamping is slightly better, the first hot stamping on the front, hot temperature l70 °C, time 6S, do not tear paper; the second hot stamping 40S on the back, cold tear the end of the paper to make.
2, garment hot stamping requirements: the first positive hot stamping, hot temperature 170 °C, time 6S (cold tear paper); finished by the infrared conveyor belt to the oven, baked at l40 °C 2min, mature can be achieved Wash fastness requirements.
Source: China Textile Economic Information Network
Metallic Marker Pen Set,Fine Point Marker Pen Set,Non-Toxicn Acrylic Paint Marker Pens,Non-Toxicn Paint Marker Pens
Zhoushan Shenglan Trade Co., Ltd.  , https://www.seamiart.com