The commercialization of printed patterns is to print design patterns, photos, text information, etc. on the substrate, making it a completely independent product for circulation, such as labels. There are many ways to print labels. This article mainly introduces transfer printing labels, that is, the printing patterns and colors are transferred to the substrate by physical and chemical methods. The application characteristics and usage methods of this printed product are many than those of conventional printing. the difference.
Wipe transfer label
1. Features and uses: suitable for hard, smooth materials such as paper, wood, plastic, etc., used in art design, photo albums, toy stickers. Scratch music, transfer paper, etc.
2. How to use: Uncover the release paper on the surface of the finished label, align the pattern with the position to be transferred, wipe it evenly on the back of the pressure-sensitive film with nails or wood chips, and tear the transparent film to complete the image transfer
Reverse pressure sensitive transfer label
1. Features and uses: Reverse pressure-sensitive transfer labels are divided into three types: solvent-resistant, scratch-resistant, and baking-resistant. The solvent-resistant pressure-sensitive transfer label is resistant to solvent scrubbing after transfer; the scratch-resistant pressure-sensitive transfer label can be used without any treatment after transfer to have good adhesion and scratch resistance, but avoid hard objects Scratch; high temperature baking type pressure-sensitive transfer label can be glazed and baked after transfer, or directly baked without spraying oil. Pressure sensitive transfer labels are suitable for surface decoration of hard materials such as metal, plastic, synthetic materials, such as air conditioners, refrigerators, washing machines, water heater housings, fishing rods, cue sticks, bicycles and other sports equipment.
2. How to use: Just tear open the protective film, align it with the transferred position, squeeze it evenly and tear the bottom paper to complete the pattern transfer.
Reverse water transfer label (B, C transfer label)
1. Features and uses: The so-called B and C transfer labels, that is, the reverse transfer patterns need to be transferred with the help of B and C transfer liquids, and can be applied to bicycle frames, car shells, fishing rods, and wooden products. Smooth surfaces such as metal.
2. How to use: Immerse the water transfer label in the B and C liquids for about 6 seconds, remove it and paste it on the surface to be printed, scrape it evenly on the back of the paper with a rubber strip, scrape the middle moisture, and then use After wetting, the base paper can be torn open, and the pattern is transferred to the substrate. Use a clean damp cloth to wipe off the water left by the pattern on the surface of the substrate. After it is fully dried, you can spray varnish and baking treatment. Because of its anti-stickiness on the surface, it is generally used on products with a more regular surface.
Soluble forward water transfer label
1. Features and uses: The so-called soluble forward water transfer label, that is, the water transfer paper that functions as a film and bridge, can be dissolved in the transparent varnish in the post-processing process, leaving no traces, and can be used in helmets , Bicycles, automobiles, various rackets, cue sticks, toys, musical instruments, small furniture, and other surface materials.
2. How to use: Cut the label pattern, immerse it in warm water at 25-40 ° C for 30--60 seconds, take out the transfer paper and paste it on the surface of the substrate. It is suitable for the pattern to slide on the paper surface. It has been separated from the backing paper. After cleaning the surface of the object with water, use a rubber strip to evenly dry the water under the layer to make the pattern flat on the surface of the material. Finally, wipe off the water with a clean cloth to complete the transfer of the pattern.
Because the graphic adhesive film layer has a certain toughness, when the moisture under the layer is dried, the pattern should be attached to the uniform on the irregular surface while wiping the water, which is also the biggest advantage of the water transfer method. After drying enough, you can spray varnish and baking on the transfer graphics. Must be fully dried, otherwise bubbles will appear after baking, resulting in waste label. The characteristics of water transfer labels are exquisite printing, bright colors, a wide range of applicable materials, the labels are firm, beautiful, and not easy to change color, especially for irregular surfaces with good decorative.
Peelable film forward water transfer label
1. Features and uses: The peelable film type forward water transfer label means that during the transfer process, the water transfer adhesive film that functions as film formation and bridging can be torn off, and the patterned ink layer is attached to the material after transfer In order to achieve the effect that direct screen printing cannot achieve. It is widely used in irregular surface decoration of ceramics, glass crafts, gifts, bicycle racks, motorcycle baffles, packaging containers, helmets and so on.
2. How to use: Cut the label and immerse it in warm water at 25-40 ° C for 30--60 seconds, remove the transfer paper and paste it on the surface of the substrate; wait for the pattern to slide on the paper surface, that is, after it has been separated from the attached paper , Clean the surface of the object, press the pattern and pull out the bottom paper, and adhere the pattern to the surface of the substrate; use a rubber strip to evenly dry the water under the layer to make the pattern adhere to the surface of the substrate, and then use a clean cloth Wipe off the water and the pattern transfer is completed. Dry for at least 1 hour after transfer. For plastic and wood products, apply varnish after peeling the film. Baking at 800 ° C for 10 minutes or at 180-200 ° C for 15-20 minutes can achieve good results. This method is suitable for glass and ceramic products, also known as glass and ceramic low temperature water transfer labels.
made from silicone. Soft and stretchy, stress-free, easy to clean and hygienic, easy washable with soap and water. Very comfortable with shoes or bare feet during day or night while you wear home, gym and outdoor. toe separators make pedicures easier by helping to protect fresh nail polish as it dries.Simple and practical design, and easy to use.Suitable for both home use and salon use.Divide your toes or fingers, more convenient to pedicure or manicure.
Toe Separator,Gel Toe Separator,Bunion Toe Separator,Silicone Toe Separator
Yangjiang Yangdong Kartier Beauty Tools Product Factory , https://www.kartierbeauty.com