Mounting and positioning is the preparation work before screen printing. The most common methods of mounting and positioning are as follows:
1. Angle positioning method
The angle iron is processed into a right angle and fixed at each working position on the workbench. The size of several sets of screen frames is the same. When printing, make the graphics and text accurately at the same position on the screen. When printing, hold the screen on both sides of the corner gauge-just lean.
2. Tooling positioning method
This method is commonly used for printing buckles on special-shaped objects. Due to the irregular shape of the printed products, it can be specially installed and fixed at a suitable position on the worktable. Each time the book is made, the printed parts can be manually installed.
3. Punch positioning method
The punching positioning method is to move from the original design, the production of Ning Ning, to the printing, and to make 3-4 round holes in the middle of the two corners of the near four corners. In the plate making, this should prevail, so in the trial After a little adjustment when printing, it will be more convenient to overprint to meet the expected requirements.
WEIHAI WEFISH OUTDOOR PRODUCTS CO.,LTD , https://www.wefishtackle.com