In the composition of the engraving machine, the track and the slider play a role of movement and support, which is an important part of the engraving machine and an important accessory for the operation of the engraving machine. The commonly used tracks are both compasses and square tracks. In the actual engraving machine work, we often encounter the customer's engraving machine in a certain direction, check the electrical parts, the driver, the wiring, the stepping motor are no problem, and finally we found that the track slider died. In the winter, there are more in the winter, and the industry that uses the engraving machine is generally more MDF. The reason for this phenomenon is that the daily maintenance work is not done well, especially for the high frequency of work and the harsh environment. It is necessary to strengthen the maintenance work of the engraving machine track. Generally, it is necessary to do a comprehensive slider cleaning for one week to half a month. When cleaning, it is necessary to use diesel or gasoline without viscosity. Do not use a larger viscosity. The grease, in the winter, is more likely to cause the slider to die, after cleaning and then add some lubricants, I hope that everyone pay more attention to these in actual use, so as not to bring unnecessary trouble to themselves.
Home Ladder,Plastic Home Ladder,Foling Home Ladder,Household Home Ladder
Taizhou Baiying Commdity Co., Ltd , https://www.baiyingplastics.com