note:
1. The following monthly maintenance and repair work is performed every 1,000,000 copies
2. For high-intensity work of more than two shifts, the following maintenance and maintenance work is best performed multiple times a month
Importance of care for the maintenance position of the maintenance parts. Reference time 1. The front gripper of the roller gripper row has 5 grease nipples, and there are many small wheels that need to be cleaned for 3 minutes. The delivery roller 6 grease nipples (304 °) 2 minutes stamping Roller with 5 grease nipples in each row for 4 minutes. Roller drum with 6 grease nipples in each row for 6 minutes. Roller drum with 5 grease nipples in each row for 6 minutes. Lubricate the roller gripper. Use a small brush to dip motor oil to lubricate the braces and gripper rod. 2. Set Barrier system important plate cylinder transmission surface on the circumferential registration gear on the blue registration point 2 minutes important horizontal and circumferential registration fine-tuning from start to end movement once again + 1.95 + 1.95 / -1.95-1.95 2 minutes important side regulation The lead screw goes through from beginning to end, if necessary, clean and lubricate for 2 minutes 3. Feida and paper-feeding ultrasonic double sheets to clean the dust, the side gauge detection also needs to be cleaned for 1 minute in the feeder head and the rotary valve lubricates the cam, guide rail, slide , Clean the paper powder in the rotary valve, oil-free maintenance for 10 minutes. The reverse side of the paper guide housing is located under the impression cylinder. The reverse side of the paper guide housing is also wiped clean as much as possible. 10 minutes. The spring in the shaft hole of the rod plus Oil 5 minutes 4. Water roller and ink roller ink fountain ink area inspection, lubrication, adjustment 4x10 = 40 minutes ink roller water roller inspection and adjustment pressure 4x30 = 120 minutes water bucket roller gear butter 4 minutes important water roller ink roller decalcification The ink roller (without water roller) is further deep cleaned with a liquid, etc., and the rollers are alternately replaced with spare rollers. The removed rollers are covered with the accumulation of paste and placed overnight, and then cleaned and preserved. Use grease to lubricate the bearing of the friction surface ink roller on the inside of the wallboard with grease, and lubricate the oil by the landing gear. 5. Change the water tank and check the conductivity every week. Change the water thoroughly once a month for 10 minutes. The radiator cleans the heat exchanger. Dust 5 minutes Secondary alcohol measurement system Check the proportion of alcohol weekly, clean the two buoyancy bottles of the alcohol measurement system 1 minute backwater in the water tank Check the water supply and return water in the water tank, adjust the return water with more foam, clean the spool if necessary , Dredge the pipelineFragrance Machine,Air Fragrance Machine,Scentair Essence Machine,Air Perfume Machine
Jiangsu Raymeel Home Decoration Co., Ltd. , https://www.raymeelhome.com