Goat interferon (IFN-γ) ELISA detection kit
user's Guide
Detection principle
The kit uses double antibody one-step sandwich enzyme-linked immunosorbent assay (ELISA). To the coated microwells pre-coated with goat interferon gamma (IFN-γ) capture antibody, add the specimen, standard, and HRP-labeled detection antibody in sequence, incubate and wash thoroughly. The color is developed with the substrate TMB, which is converted into blue under the catalysis of peroxidase and into the final yellow under the action of acid. The color depth is positively correlated with goat interferon gamma (IFN-γ) in the sample. Measure the absorbance (OD value) at 450nm with a microplate reader to calculate the sample concentration.
Sample collection, processing and storage methods
1. Serum: Use a test tube that does not contain pyrogens and endotoxins. Avoid any cell stimulation during the operation. After collecting blood, centrifuge at 3000 rpm for 10 minutes to quickly and carefully separate serum and red blood cells.
2. Plasma: EDTA, citrate or heparin anticoagulation. Take the supernatant by centrifugation at 3000 rpm for 30 minutes.
3. Cell supernatant: centrifuge at 3000 rpm for 10 minutes to remove particles and polymers.
4. Tissue homogenate: Add tissue to the right amount of saline and mash. Take the supernatant by centrifugation at 3000 rpm for 10 minutes.
5. Preservation: If the sample is not tested in time after collection, please aliquot it in one dose and freeze it at -20 ℃ to avoid repeated freezing and thawing. Thaw at room temperature and ensure that the sample is thawed evenly and fully.
Bring your own items
1. Microplate reader (450nm)
2. High-precision sampler and tip: 0.5-10uL, 2-20uL, 20-200uL, 200-1000uL
3. 37 ℃ thermostat
Operation notes
1. Store the kit at 2-8 ° C and equilibrate at room temperature for 20 minutes before use. The concentrated washing liquid taken out of the refrigerator will have crystals, which is a normal phenomenon. The water bath is heated to completely dissolve the crystals before use.
2. The slats not used in the experiment should be immediately returned to the ziplock bag, sealed (dry at low temperature) and stored.
3. The standard dilution can be regarded as a negative control or blank; the sample after pretreatment does not need to be diluted, just take 10μL and add it.
4. Perform the incubation operation strictly in accordance with the time, amount of liquid and sequence indicated in the manual.
5. Shake all liquid components thoroughly before use.
Kit composition
name
96-well configuration
48 hole configuration
Remarks
Microplate
12 holes × 8
12 holes × 4 strips
no
Standard product (1600pg / mL)
0.6mL
0.6mL
Dilute according to the instructions
Standard dilution
6mL
3mL
no
Sample diluent
6mL
3mL
no
Detection antibody-HRP
10mL
5mL
no
20 × washing buffer
25mL
15mL
Dilute according to the instructions
Substrate A
6mL
3mL
no
Substrate B
6mL
3mL
no
Stop solution
6mL
3mL
no
Sealing film
2 sheets
2 sheets
no
Instructions
1 serving
1 serving
no
Ziplock bag
1
1
no
Note: The standard product is diluted with standard product diluent in order: 1600, 800, 400, 200, 100, 50pg / mL.
Reagent preparation
Dilution of 20 × washing buffer: 1:20 dilution of distilled water, that is, 1 part of 20 × washing buffer plus 19 parts of distilled water.
Washing method
1. Manually wash the plate: throw away all the liquid in the hole, fill each hole with the washing liquid, leave the liquid in the hole after standing for 1 min, pat dry on the absorbent paper, and wash the plate 5 times in this way.
2. Automatic plate washing machine: Inject 350μL of washing liquid into each well, soak for 1min, and wash the plate 5 times.
Steps
1. Take out the required slats from the aluminum foil bag after equilibrating at room temperature for 20 min. The remaining slats are sealed with a ziplock bag and put back at 4 ° C.
2. Set up standard wells and sample wells, add 50μL of standard products of different concentrations to the standard wells;
3. Add 10μL of the sample to be tested first, and then add 40μL of the sample diluent;
4. Then add 100 μL of detection antibody labeled with horseradish peroxidase (HRP) to each well of the standard and sample wells, seal the reaction well with a sealing plate, and incubate for 60 min in a 37 ° C water bath or incubator.
5. Discard the liquid, pat dry on the absorbent paper, fill each well with the washing solution, let stand for 1min, shake off the washing solution, pat dry on the absorbent paper, and repeat washing the plate 5 times (you can also wash the plate with a washing machine)
6. Add 50 μL of substrate A and B to each well, and incubate at 37 ° C in the dark for 15 minutes.
7. Add 50μL of stop solution to each well, and measure the OD value of each well at 450nm wavelength within 15min.
Result judgment
Draw standard curve: In the Excel worksheet, the standard product concentration is used as the abscissa, and the corresponding OD value is used as the ordinate. The standard product linear regression curve is drawn, and the concentration value of each sample is calculated according to the curve equation.
Kit performance
1. Accuracy: The correlation coefficient R between the linear regression of the standard product and the expected concentration is greater than or equal to 0.9900.
2. Sensitivity: The minimum detection concentration is less than 10 pg / mL.
3. Specificity: Does not cross-react with other soluble structural analogs.
4. Repeatability: The coefficients of variation within and between panels are less than 15%.
5. Storage: 2-8 ℃, protected from light and moisture.
6. Validity: 6 months
Disclaimer
1. The kit is for research use only, and should not be used for clinical or human experiments, otherwise all the consequences will be borne by the experimenter, and the company will not be responsible.
2. Strictly follow the instructions, and the experimenter violates the instructions, and the consequences will be borne by the experimenter.
Shanghai Yuping Biological Technology Co., Ltd. specializes in selling ELISA kits of various brands and grades, with quality assurance and perfect after-sales service. And can be detected on behalf of free. Serving universities and immunology research units. Technicians serve you better.
In today's home decoration market, various types of Curtain Rod connection rods emerge endlessly, providing consumers with a wealth of choices. This article will introduce the different types of curtain rod connection rod and their characteristics in detail to help you better understand the market and choose the product that is right for you.
First, classification by material
1. Iron connection rod: This connection rod is usually made of cast iron or forged iron, which is durable and affordable. However, the iron connection rod may not be aesthetically pleasing and is prone to rust.
2. Stainless steel connecting rod: Stainless steel is a kind of corrosion-resistant and wear-resistant metal material, so stainless steel connecting rod is becoming more and more popular in the market. The stainless steel connection rod is beautiful in appearance, easy to clean, and has a long service life.
3. Aluminum alloy connecting rod: Aluminum alloy connecting rod has the characteristics of light, beautiful, easy to install, suitable for modern simple style of home decoration. However, aluminum alloys are not as strong and corrosion-resistant as stainless steel.
2. Classification by use
1. Fixed connection rod: Fixed connection rod is usually used to fix the curtain rod to the wall, suitable for places without Windows or where the curtain needs to be fixed.
2. Roller-type connecting rod: The roller-type connecting rod enables the curtain to slide easily through the pulley system, which is suitable for situations where the position of the curtain needs to be adjusted frequently.
3. Telescopic connecting rod: The telescopic connecting rod can be adjusted according to the size of the window, suitable for different sizes of Windows, saving space and easy to use.
3. Classification by style
1. Traditional style: Traditional style connecting rod is usually straight rod or curved shape, suitable for traditional or retro style home decoration.
2. Modern simple style: The modern simple style connection rod is usually designed for simple lines, which is suitable for modern or minimalist style home decoration.
3. Creative design style: The creative design style connection rod is more personalized, such as with flowers and birds, geometric patterns, etc., to add a touch of art to the home.
4. Other features
1. Material surface treatment: Many connecting rods are coated on the surface, such as galvanized, spray, etc., to improve rust prevention and aesthetic appearance.
2. Material color: In addition to the common white and black, there are now many other colors of the connection rod to choose from, such as gold, silver, gray, etc., to add a highlight to home decoration.
3. Installation mode: Some connecting rods support wall-mounted installation and floor installation to meet the needs of different scenarios.
Summary: When choosing a curtain rod connection rod, you need to choose the right type according to your home style, budget and usage needs. By understanding the various types and features, you can easily find the right product for you. Hopefully, this article will help you make an informed decision when choosing a curtain rod connection rod.
Curtain Rod Splice,Curtain Rod Splice Connector,Curtain Rod Joining Splice,Curtain Rod Splice Fix
HANGZHOU AG MACHINERY CO.,LTD , https://www.famourdecor.com