Authoritative statement: rational pavement use is more worry-free In today's floor innovation bottlenecks and product homogenization is getting worse today, consumers should put more energy into the paving stage of the floor.
There has always been a saying in the flooring industry that the wooden floor is “three-point floor seven-packâ€, that is, the quality of the installation determines 70% of the floor quality. The unsatisfactory use of the floor is largely caused by the unevenness of the floor covering. The problem of floor covering has become the biggest problem that restricts the use of the floor.
To avoid unpleasant floor repairs, it is more important to do a good job in sales. Before they install, the staff must perform four different aspects of measurement preparation. This has the advantage of greatly enhancing the accuracy and precision for the later construction process, and effectively detecting the “sand, tide, concave and convex†of the ground. The specific degree of the five major issues such as "cracking".
In addition, the staff should carefully examine the three aspects of ground level, ground tightness and non-humidity on the ground.
Class 4 floor price/performance ratio Solid wood floor price is higher Solid wood floor is roughly divided into hardwood floor and cork floor. The hardwood floor has the texture hard, fine texture, good wear resistance, elasticity, dryness, cleanliness, beautiful appearance, etc. The wood used is ash, birch, walnut, eucalyptus, sea eucalyptus and eucalyptus, etc. Some wood floors use cherry wood, longan wood, camphor, etc.; and cork flooring is mainly pine, fir, cedar, hemlock, etc. snow, cypress, warm, elastic. However, the wear resistance is poor, and if it is not dry enough, it is more likely to be deformed and cracked.
In general, although the solid wood flooring has the advantages of good foot feel, natural texture, good thermal insulation, etc., the hardness is slightly poor.
The price difference of solid wood composite flooring is divided into the following three types: three-layer solid wood composite flooring, which is made of three different kinds of wood. The surface layer is made of hardwood such as eucalyptus, birch, eucalyptus, cherry, and ash. The layers and the bottom layer are made of soft wood, such as the core board with pine wood, and the elasticity of the solid wood floor, which reduces the cost.
The multi-layer solid wood composite floor is made of multi-layer plywood, and the surface layer is set with hardwood veneer, which is laminated by urea-formaldehyde resin.
The new solid wood composite floor has the same surface as the first type of hard wood. The middle layer and the bottom layer use medium density fiberboard or high density fiberboard, and the effect and durability are similar to those of the three-layer solid wood floor.
The floor wear resistance is between the laminate floor and the solid wood floor, and the hardness is lower than the laminate flooring and solid wood flooring.
The most affordable laminate flooring is composed of three layers of materials. The middle layer is made of density fiberboard. It has strong impact resistance and is not easy to be deformed. The bottom layer is balanced layer and protects against moisture. The surface layer is covered with melamine wear layer on the printed decorative layer. The anti-wear strength is much higher than wood, has good flame retardancy, and is anti-corrosion, moisture-proof and anti-mite.
Compared with the above two types of flooring, the surface of the laminate flooring can be printed with various wood grain and beautiful appearance. The paving is quick and easy, saving wood. But the elasticity is worse than solid wood flooring, and its biggest advantage is that the price is the cheapest.
Bamboo flooring is cost-effective. Bamboo flooring is a floor made of bamboo. It is rich in the natural beauty of natural materials and has the advantages of wear resistance. It can also prevent smashing and shock. Bamboo flooring is warm in winter and cool in summer, moisture-proof and wear-resistant, easy to use, especially to reduce the amount of wood used, to protect the environment.
Consumer Tips: Picking the Floor to Master Seven Principles Since wear resistance is not the most important indicator of buying a floor, how should consumers choose a wooden floor? Seven suggestions for selecting a floor are given:
1. Laminate flooring should buy products with a certain reputation. The product must have the test report of the national authority, and the product packaging must have a complete identification.
2. Look at the wear resistance number. The wear resistance of the household floor is usually more than 4000 rpm, and it is usually more than 9000 rpm in public places. The decorative layer should be resistant to light.
3. Check the formaldehyde release limit. The amount of formaldehyde released in the laminate flooring is ≤1.5mg/L.
4. Look at the substrate density. The substrate density of the laminate flooring should be 0.84-0.9/cm3. The smoke density is too low or too high.
5. Look at water resistance. The index value is high, the water resistance is poor, and the dimensional change is easy to occur in a humid environment, and the water absorption thickness expansion rate should be ≤ 2.5%.
6. Look at the processing density. Observe whether the product is smooth and smooth, whether the gutter bite is suitable, should not be too loose, and should not be too tight.
7. Sales + paving + warranty. "Buy" and "shop" do not separate, reach the acceptance criteria for paving, and have a complete after-sales service guarantee.
There has always been a saying in the flooring industry that the wooden floor is “three-point floor seven-packâ€, that is, the quality of the installation determines 70% of the floor quality. The unsatisfactory use of the floor is largely caused by the unevenness of the floor covering. The problem of floor covering has become the biggest problem that restricts the use of the floor.
To avoid unpleasant floor repairs, it is more important to do a good job in sales. Before they install, the staff must perform four different aspects of measurement preparation. This has the advantage of greatly enhancing the accuracy and precision for the later construction process, and effectively detecting the “sand, tide, concave and convex†of the ground. The specific degree of the five major issues such as "cracking".
In addition, the staff should carefully examine the three aspects of ground level, ground tightness and non-humidity on the ground.
Class 4 floor price/performance ratio Solid wood floor price is higher Solid wood floor is roughly divided into hardwood floor and cork floor. The hardwood floor has the texture hard, fine texture, good wear resistance, elasticity, dryness, cleanliness, beautiful appearance, etc. The wood used is ash, birch, walnut, eucalyptus, sea eucalyptus and eucalyptus, etc. Some wood floors use cherry wood, longan wood, camphor, etc.; and cork flooring is mainly pine, fir, cedar, hemlock, etc. snow, cypress, warm, elastic. However, the wear resistance is poor, and if it is not dry enough, it is more likely to be deformed and cracked.
In general, although the solid wood flooring has the advantages of good foot feel, natural texture, good thermal insulation, etc., the hardness is slightly poor.
The price difference of solid wood composite flooring is divided into the following three types: three-layer solid wood composite flooring, which is made of three different kinds of wood. The surface layer is made of hardwood such as eucalyptus, birch, eucalyptus, cherry, and ash. The layers and the bottom layer are made of soft wood, such as the core board with pine wood, and the elasticity of the solid wood floor, which reduces the cost.
The multi-layer solid wood composite floor is made of multi-layer plywood, and the surface layer is set with hardwood veneer, which is laminated by urea-formaldehyde resin.
The new solid wood composite floor has the same surface as the first type of hard wood. The middle layer and the bottom layer use medium density fiberboard or high density fiberboard, and the effect and durability are similar to those of the three-layer solid wood floor.
The floor wear resistance is between the laminate floor and the solid wood floor, and the hardness is lower than the laminate flooring and solid wood flooring.
The most affordable laminate flooring is composed of three layers of materials. The middle layer is made of density fiberboard. It has strong impact resistance and is not easy to be deformed. The bottom layer is balanced layer and protects against moisture. The surface layer is covered with melamine wear layer on the printed decorative layer. The anti-wear strength is much higher than wood, has good flame retardancy, and is anti-corrosion, moisture-proof and anti-mite.
Compared with the above two types of flooring, the surface of the laminate flooring can be printed with various wood grain and beautiful appearance. The paving is quick and easy, saving wood. But the elasticity is worse than solid wood flooring, and its biggest advantage is that the price is the cheapest.
Bamboo flooring is cost-effective. Bamboo flooring is a floor made of bamboo. It is rich in the natural beauty of natural materials and has the advantages of wear resistance. It can also prevent smashing and shock. Bamboo flooring is warm in winter and cool in summer, moisture-proof and wear-resistant, easy to use, especially to reduce the amount of wood used, to protect the environment.
Consumer Tips: Picking the Floor to Master Seven Principles Since wear resistance is not the most important indicator of buying a floor, how should consumers choose a wooden floor? Seven suggestions for selecting a floor are given:
1. Laminate flooring should buy products with a certain reputation. The product must have the test report of the national authority, and the product packaging must have a complete identification.
2. Look at the wear resistance number. The wear resistance of the household floor is usually more than 4000 rpm, and it is usually more than 9000 rpm in public places. The decorative layer should be resistant to light.
3. Check the formaldehyde release limit. The amount of formaldehyde released in the laminate flooring is ≤1.5mg/L.
4. Look at the substrate density. The substrate density of the laminate flooring should be 0.84-0.9/cm3. The smoke density is too low or too high.
5. Look at water resistance. The index value is high, the water resistance is poor, and the dimensional change is easy to occur in a humid environment, and the water absorption thickness expansion rate should be ≤ 2.5%.
6. Look at the processing density. Observe whether the product is smooth and smooth, whether the gutter bite is suitable, should not be too loose, and should not be too tight.
7. Sales + paving + warranty. "Buy" and "shop" do not separate, reach the acceptance criteria for paving, and have a complete after-sales service guarantee.
Ps Spoon,Polystyrene Spoon,Plastic Ps Spoon,Disposable Utensil Spoon
Anhui Jianfeng Environmental Protection Technology Co., Ltd , https://www.jfplacutlery.com