In the blink of an eye, sometimes there is not enough sunshine on cloudy days, and long periods of rainfall cause different degrees of moisture in the furniture. If it is not handled in time, it may cause different conditions such as peeling, rusting, and mildew. So how to solve the problem of home dampness is a key issue. Let's take a look at some practical and good ways to repair damp furniture.
Material determines the degree of mildew: do not dry and dry
General furniture is divided into materials, which can be roughly divided into panel furniture, solid wood furniture and metal furniture. Panel furniture is generally sealed and has a strong moisture resistance. However, the furniture joint is a sanitary corner. If it is not cleaned, it will cause the protective layer to separate from the internal wood. When the moisture content of the wood is increased, it will expand and deform, and in severe cases, the surface sheet will be cracked. In case of such problems, you can first put the moisture-proof bag in the damp area to absorb moisture, and then use the air conditioner to dry the damp part. When using the air conditioner, be careful not to blow it directly, otherwise it will cause the skin to be brittle.
After the damp, the solid wood furniture will have small water drops on the outer paint surface, and there will be sporadic mildew spots. When cleaning, first remove the mildew on the furniture with water or mild detergent, then use the dehumidification equipment. (Air conditioning in the home can be) Lightly blowing the damp part, do not blow directly when dehumidifying, remember not to worry, must slowly remove the water. Finally, wipe gently with a cotton cloth or a soft dry towel.
Wooden furniture must be “dry†and should not be exposed to the sun. Otherwise, the skin and internal gradient of the furniture will increase, which will cause the furniture to crack and lose its use value. In the usual maintenance, the panel furniture pays attention to the protective layer on the surface and tries to protect it from falling off. The solid wood furniture can be applied once every time to the walnut oil, so that the cells of the furniture can be kept full and not easily invaded by water vapor.
After the metal furniture is damp or soaked in water, the rust of the peeled part of the paint should be checked first. If the rust is not serious, the rust can be gently cleaned with the rust inhibitor. If it is serious, you can use sandpaper or grinding wheel to clean it. After the bright metal layer is exposed, wipe it with a dry cloth and then apply anti-rust paint. Metal furniture should not be placed close to the place where the water vapor is heavy. You can put a moisture-absorbing bag near it to dehumidify.
The sofa is not easy to be mildewed: leather beauty depends on chicken oil
Sofas are usually divided into leather sofas and fabric sofas. After the damp, the leather sofa can be used to remove the mildew by the mold remover, and then applied to the surface with the leather. Do not dry during maintenance, which will make the leather brittle and lose its softness and beauty. Tell the reader a small method, usually when you buy chicken legs, there will be a layer of chanterelle, and apply it to the leather surface to protect the leather surface.
If the cloth sofa is usually cleaned and the surface is dust-free, it is easier to clean it up. Once the dust and moisture form a solution, it will deeply erode the inside of the cloth. If the tide surface is not large, you can use the cleaning spirit or other cleaning when using the bowl. Dispose of the agent and then slowly dry it with a hair dryer.
Summary of small series: furniture must pay attention to the usual maintenance, although the maintenance is not urgent, but the long-term maintenance can greatly slow down the erosion of furniture in the case of sudden situation, thus winning time for the repair of furniture. In normal times, pay more attention to the circulation of indoor air, maintain the balance of dry and wet indoors, and do not open the south window when the weather is wet, to avoid moisture entering. At the same time, often clean, keep the furniture clean and tidy, no damage. This not only extends the service life of the furniture, but also contributes to low-carbon environmental protection.
For more information on China's furniture industry, please pay attention to the official website of Xianghe Furniture City ().
Traditional toothbrushes are usually straight shank, which is easier to use. The curved handle can penetrate deeper into the mouth. The elastic handle is supposed to avoid damage to the gums caused by excessive strength of the Toothbrush on the gums. Skid handle to avoid brush slip when brushing. In fact, no brush holder design has special cleaning effect. You can choose what you like.
After each brush, the toothbrush must be cleaned and dried with clean water. Put the brush head upwards in a ventilated and dry place. The toothbrush has been used for a long time, and the brush has accumulated bacteria and is not healthy. Therefore, the brush must be replaced. At least every 3 months, a toothbrush should be replaced.
Traditional Toothbrush,Prison Toothbrush,Children'S Toothbrush,Baby Toothbrush
Yangzhou Special Care Daily Products Co., Ltd , https://www.justspecialcare.com