Inspection and Quarantine Reminder: Packaging for Dangerous Goods

Recently, when the dangerous goods and packaging testing technology center of the Changzhou Inspection and Quarantine Bureau performed a drop test on a batch of steel drums containing dangerous goods submitted by the company, there were two cases where the bottom of the barrel dropped off. It is understood that since the beginning of this year, the Bureau has detected three consecutive samples of the bottom of the bucket.

After a comparative analysis, the inspectors found that these batches of samples were all made of hot-rolled steel sheets used for the production of barrel lids to make the bottom of the barrels. However, the cold-rolled steel sheets must be used to produce the steel sheets for the bottom of the barrels as required, so that even if the production process level is higher, When the barrel body and the bottom of the barrel joint are impacted, they are easily cracked. This hidden defect cannot be detected in the factory's self-inspection process. If such steel drums are used to hold chemical dangerous goods, leakage may occur during transportation and loading and unloading. This may cause damage to life and property. The loss is unthinkable. The center has issued unqualified reports on such steel drums in a decisive manner, and told them one by one about the seriousness of the matter, and requested that all of them be reworked and rectified, so as to avoid such unqualified packaging from entering the market. At the same time, the staff of the Changzhou Bureau gave feedback to the enterprises. Such companies repented on the “Zhang Guan Li Dai” phenomenon in the production process, and at the same time admitted that due to the large amount of factory operations and insufficient manpower, the workers are often struggling to cope with the production process. The material causes the above quality problems.

It is understood that in recent years, with the continuous increase in the export volume of chemical dangerous goods in China, the production and production scale of dangerous goods packaging manufacturers has also rapidly expanded. However, such incidents rarely appear when packaging companies have just been put into production. , why is the scale of the company growing stronger, and the errors that have occurred are getting lower and lower? Inspector analysis is mainly caused by the following two factors:

I. Poor quality and safety awareness: Dangerous goods packaging companies are very cautious when they have just started development. They have strict requirements on the quality control of products. However, the company has relaxed the quality and safety accidents in a few years of carefulness. Vigilance, safety awareness is gradually weakening. Therefore, to improve the quality of dangerous goods packaging, we must first raise the awareness of quality and safety of relevant personnel, to realize that the low quality of packaging will cause huge losses to the country, and at the same time, it will also damage the reputation of the company and affect the sales of its products. . The improvement of ideology and understanding is the source of promoting technological improvement and improvement.

Second, stagnant management level: In recent years, packaging companies have developed extremely rapidly. Small-scale enterprises have developed large-scale enterprises in a few short years. Some companies have focused on increasing output and scale, but they have neglected the improvement of the management level of enterprises. The output value of enterprises has reached With tens of millions of dollars, management capacity still stays at the level of a few million yuan. For example, some companies do not want to increase their manpower to save costs. Their business volume has doubled, while the amount of workers has remained constant, and employees' overloaded work can easily result. Work errors; ignoring regular training of employees, the production process does not improve and innovate year after year. These factors eventually led to the disconnect between production and management of the company, and the output went up, but the quality was down. From this we can see that the management level of an enterprise must keep up with the pace of scale development, and the pursuit of production must also ensure quality. 200L Refurbished steel barrels

The low quality of packaging is extremely detrimental to industrial production, people’s lives and the development of foreign trade. With the needs of the production and scientific research undertakings and the situation after China’s accession to the WTO, the types, scope of use, and import and export volume of chemical dangerous goods will all increase. There is a significant increase in growth. Therefore, both in terms of current and long-term interests, we must attach great importance to the quality of dangerous goods packaging.