How to use and maintain the tool correctly

1. For cheekbones and meat, please use them separately for different purposes. The cutter should not cut or cut hard objects such as metal or wood.

2, when the cheekbone should use the blade of the heel to contact the bone, vertical knife. If the bone catches the edge of the blade, it should not be shaken to the left and right, pull out the edge of the blade. The correct method is to raise the bone with the knife and cut it again until the bone breaks. Otherwise, it will cause the cutting edge of steel blade to be broken into an arc, which is improper use and is not covered by the warranty.

3, because the knife is a kitchen hardware used very frequently, after each use need to be washed clean, dry, put on cooked cooking oil, placed in a ventilated, dry place, away from water and gas cookers, to prevent rust. (Stainless steel cutters come into contact with carbon monoxide gas and cause yellow spots and should be prevented).

4, kitchen knives, scissors rusty, can use a piece of sweet potato carefully rub a few times, and then wipe clean with a rag can, after the kitchen knife rust, the knife on the Taomi water immersion for 3 hours, you can go to rust.

5, tool water mill method: when the knife is blunt, add water to the angle of 15 degrees -20 degrees on the sharpening stone back and forth grinding can be very sharp.