"Linyuan squid, it is better to retreat to the net." Many people envy other people's kites, it is better to make one by yourself. The following describes a kite making method with high success rate and easy flying:
First, the skeleton:
1. Take a bamboo strip with a length of 1200mm, remove the bamboo yellow and cut it into the middle width × thickness = 3 × 3mm, and the ends are 2 × 1.2mm, and make the upper leg.
2. Take two 320mm long bamboo strips, remove the bamboo yellow, and cut them into 2.2×2.2mm for diagonal strips.
3. Cut a 390mm long, 3×3mm bamboo strip for the center strip.
4. Cut two 10×3×3mm headlines, and one 14×3×3mm is the tail strip.
5. Use cotton thread to tie the joints of the bamboo strips and use 502 glue to drip.
Second, paste: use the plastic bag on the market to buy food, use 401 glue or construction glue to cut the plastic bag on the skeleton according to the shape shown by the dotted line in the figure.
Third, drawing: draw the eagle's pattern with a marker.
4. Pick up line: The upper picking line is about 40cm long. The two ends are tied at the joint between the headline and the upper leg. One end of the lower lifting line is at the center of the upper lifting line, and one end is tied at the joint of the diagonal strip and the center strip.
In this way, your eagle-shaped kite will be ready, and you can go to the wind and day!
Hard Case Luggage,Luggage Sets,Traveling Luggage,Hard Shell Luggage
Yongxin Juanhua Leather & Bags Co., Ltd , https://www.luggagegld.com