Blast drying ovens are widely used in industrial and mining enterprises, laboratories, scientific research units, etc. to provide drying, baking and melting wax, and sterilization. The microcomputer intelligent binocular temperature control system has temperature control protection, accurate and reliable. The working temperature can be set arbitrarily, and it has deviation alarm function.
Such as hot air circulation. Because the equipment is in a state of high temperature and constant temperature for a long time, the blast drying oven needs more proper maintenance and maintenance.
1. Do not put flammable materials in the dry box without explosion-proof device.
2. Before using, you must pay attention to whether the power supply voltage used is consistent. When in use, the grounding wire of the power socket must be grounded as specified.
3. After the blast drying oven is used up every time, the power supply must be cut off and the inside and outside of the oven must be kept clean. Hang the corresponding logo after cleaning.
4. Do not over-squeeze the contents of the box, and leave a space for natural convection of air, so that the humid air can escape on the wind roof.
5. Periodically check whether the silver contacts of the temperature regulator are fluffy or uneven. If so, use fine gauze to smooth the contacts before use. They should also be cleaned frequently with a cleaning cloth to make good contact (note that the power must be cut off ). Do not hit the metal pipes of the indoor temperature regulator to avoid affecting the sensitivity.
6. When the blast drying oven is energized, do not touch the electrical part of the space on the left side of the box with your hands or wipe it with a damp cloth and rinse with water. The power should be cut off during testing.
7. The power cord should not be entangled with metal objects, and should not be placed in a place with high temperature or humidity to prevent the rubber from aging and leakage.
WEIHAI WEFISH OUTDOOR PRODUCTS CO.,LTD , https://www.wefishtackle.com