[ Chinese wardrobe net ] The most important part of the overall wardrobe is the sheet. The quality of the sheet directly affects the length of the wardrobe . So how do you choose a high-quality wardrobe sheet? The following small series is specifically for everyone to share.
First, look at the material of the board of the wardrobe. Whether it is a high-density board or a particle board, the method of judging is that the fine fibers in the high-density board are tightly combined, and the density is large and heavy. The high-density board can withstand large pressure and has a long service life; while the fine particle structure of the particle board is not tight enough, it is lighter in the hand, the bearing capacity is small, and the service life is short.
Second, see if the sheet substrate is environmentally friendly. As long as the content of free formaldehyde in the board is ≤9 mg/100 g, which is the E1 environmental standard, it is not harmful to human health. The most direct way is to open the door and open the drawer. If there is a strong irritating smell, it indicates that the formaldehyde content exceeds the standard; look at the merchant's material testing certificate to see if it holds the relevant national inspection certificate of the wood-based panel quality testing center.
Third, look at the quality of the veneer. Some wardrobes look good on the surface, however, with a light stroke, you can draw obvious scratches. These custom-made wardrobes are made of low-cost wardrobes on the market and are covered with glazed paper and ornate paper sheets, which have poor wear resistance. Professional custom closet manufacturers generally use environmentally friendly melamine veneer with thick thickness and high temperature and high pressure treatment, high surface strength, abrasion resistance and scratch resistance.
Fourth, the board edge seal to see work. Professional custom-made wardrobe manufacturers use precision panel saws to cut sheets, and there is no chipping around the sheets. After the edges are sealed, the water in the air is effectively prevented from intruding into the interior of the board. Some manufacturers have no professional equipment, rough cutting, and obvious edge collapse around them. Some even cut corners and only cut one side of the front side of the board. The unsealed surface easily absorbs moisture from the air, causing the sheet to swell, causing the wardrobe to deform and affecting the service life.
Third, see if the plate is real material. In order to reduce costs, some small manufacturers currently on the market usually sell dog meat and deceive consumers. The thickness of the standard cabinet body is 18 mm, and the method commonly used by small manufacturers is to use the particle board as a high-density board to promote the board thickness of 16 mm, but it is 18 mm to the consumer, so Xiao Bian reminds everyone to pay attention.
Fourth, the type of plate is not the only standard to determine the quality of the plate. In the market, the plate used in the overall wardrobe is different in terms of price and quality due to materials, manufacturers, thickness, formaldehyde content and other reasons. .
Needle Cartridges,Needling Dermapen Cartridges,Microneedle Pen Cartridges,Finer Needles Cartridges
Guangzhou Vantee Electronic Technology Co., Ltd. , https://www.finerroller.com