The salt spray test chamber air compressor is a device for compressing gas, and its air compressor is similar in construction to the water pump. Most of the air compressors in the components are reciprocating pistons, rotating blades or rotating screws.
Note on the salt spray test chamber air compressor:
1) Before starting the air compressor, it is necessary to check and prepare according to the standard. It is also necessary to pay attention to the opening of all valves of the gas tank. After the diesel engine is started, it must be operated at low speed, medium speed and rated speed. It is necessary to pay attention to whether the readings of each meter are normal before running with load. The air compressor should gradually increase the load to start, and all parts can be operated at full load after being normal;
2) During the operation of the air compressor, pay attention to the meter reading (especially the reading of the barometer) and listen to the audio of each department. If abnormal conditions are found, stop the machine immediately. The maximum air pressure in the gas tank must not exceed the pressure specified on the nameplate. For every 2 to 4 hours of operation, the condensate oil discharge valve of the intercooler and the gas storage tank should be turned on 1 or 2 times. Do a good job of cleaning the machine. After long-term operation of the air compressor, it is forbidden to rinse with cold water.
3) When cleaning the heat sink, do not use the combustion method to remove the oil from the pipeline. Maintenance work such as cleaning and fastening must be carried out after shutdown. When purging parts with compressed air, it is strictly forbidden to point the tuyere to the human body or other equipment to prevent injury and damage;
4) The air compressor should be parked away from steam, gas, and dust. The intake pipe should be equipped with a filtering device. After the air compressor is in place, the spacer is symmetrically wedged.
We are a Professional manufacturer of 660nm 850nm Red Light Therapy manufacturer is located in China, including Red Light Therapy Panel,Skin Beauty Led,, etc
660nm 850nm Red Light Therapy,Red Light Therapy Panel,Skin Beauty Led
Shenzhen Bonliter Optoelectronic Co., Ltd. , https://www.szbonliter.com