[ Chinese wardrobe network ] custom wardrobe installation steps
1. Use a mat to place the floor. Start by assembling the wide side panel against the end of the wall. Place the wide side panel on the ground (maintain 700mm away from the rear wall). First, put the plate of the filled three-in-one rubber plug on the cloth, check the hole spacing and the drawing, and install the three-in-one single-link. Then the solid layer is nailed to the cork, fixed on the wide side plate, the top handle with the large handle hole facing upward, the other solid layers are facing downward, and the foot line large handle hole is facing inward (the middle solid layer is consistent with the L frame height, that is, the bottom plate to the solid layer The inner space is 960mm, and the hole is drilled on site.) Put the side panels, nail the cork, and the cork is required to connect the solid layers on both sides. Install the double connecting rod on the second cabinet. Note that the large handle on the double connecting rod can only lock half, that is, 90°. When the two solid layers are fixed to the side plates, tighten the large handles at the same time. Repeat the installation steps for the second cabinet when installing the third cabinet.
2, nail back board. Place the assembled whole cabinet on the floor of the point cloth, and lay the side panels in the same plane. Use a slider to measure the diagonal size of the cabinet and adjust it to the same level. Start with the first backing plate from the wide measuring board. Note that if there is a solid nail in the middle, draw the center line of the solid layer with a pencil and nail it. nail.
Customized wardrobe product installation details
1, the installation of the L frame. Use the side plates of the L frame to have a parallel line on the corresponding side plates, then move the center line of the three-in-one rubber particles up by 9 mm, and draw a parallel line on the corresponding bottom plate with the top frame of the L frame. The inner center 9mm draws the center line of three rubber pieces. The hole was drilled with a 10 mm drill bit and the hole depth was 10-20 mm. Install a single pole. After the L frame is installed, nails are fixed on the back plate.
2. Clean up the whole wardrobe installation debris, one person at each station, the wardrobe is slightly inclined backwards, lifted hard, and moved back to the desired position. Be careful not to scratch the floor or the wall.
3. Installation of drawers, lattice racks and pants racks.
The hotel tableware is beautiful and elegant, paired with fine china, the art of balancing aesthetics is like a work of art. The hotel dinner plate is of Seiko quality, the large plate is delicate in porcelain, light and thin in shape, full in color and beautiful in appearance.
The hotel tableware is handy, and the shallow plate is fashionable and easy to use. The glazed surface is smooth and beautiful, and the exquisite and delicate rice bowl will give you a different dining experience. Break the traditional shackles, show smart beauty, and enjoy a visual feast. Create a sense of light luxury atmosphere, three-dimensional beauty, light luxury and versatile, full of charm, comfortable hand feeling, and layered light and shadow beauty. The tableware used in the hotel is made of high-temperature healthy porcelain, which can be used in both ovens and microwave ovens. It can be used for heating, double the taste, and enhance the atmosphere of the dining table. The shape of the utensil is elegant and atmospheric, comfortable to hold, easy to hold, exquisite craftsmanship, exquisite tableware, and anti-scalding design. Improve the design grade, artistic life.
White Body Hotel Tableware Sets, Porcelain Hotel Tableware Set, Hotel Plate Dinnerware
Henan WonkingChina I/E Co., Ltd. , https://www.wshousewares.com