To know how to identify the pros and cons of furniture, you must first understand what the quality of the furniture contains. The quality of the so-called furniture mainly refers to its intrinsic quality, including the structural strength, stability, safety of the furniture, the size of each part and the fineness of processing. The specific requirements of these indicators are clearly defined in the relevant national standards, and only products that meet the standards are qualified to meet the requirements for use. When we buy furniture, we mainly need to pay attention to the following points:
First, identify the production process. The level of fine workmanship is a key factor in distinguishing the merits of furniture. Pay attention to whether there is any groove on the frame structure of the furniture, whether there is any breakage or breakage. For the hidden drawer inside, it is necessary to check whether there is a groove in the drawer structure, whether the glue is glued in the groove, whether the drawer and the plug are connected by nails.
Second, identify the cut corners. For example, some furniture uses medium-density slats and chipboard slats as load-bearing components. There are also some furniture, the back of the dressing mirror is not fixed by the baffle and the beading, only the nail is used as the supporting pin, which is not strong. The materials used in each part should be reasonable, and the structural parts should not have defects such as decay, thrift, and cracking. Whether the decorative materials have processing defects such as opening, bubbling, warping, etc., the decorative pattern should be symmetrical and beautiful.
Third: Identify the load bearing parts. The main force part of the furniture is framed, and the load-bearing horizontal strips connecting the columns near the ground should not have large knots, cracks and cracks. The strength of the board surface can be pressed by the finger to feel the fastness of the board surface. The surface material should be fixed with a well-shaped skeleton. If the skeleton is sparse, the surface will feel empty and false, and the panel will vibrate greatly. The bottom of the drawer can be pressed by hand to test the strength.
Fourth: Identify internal conditions. Open the door and drawer door of the home to see if there is any decay in the contents. You can use your nails to lick it, and you can easily break in and the internals are decaying. Smell it with your nose. If there is a phenomenon of nose, glare, and tearing, it means that the formaldehyde content in the glue is too high, which will endanger human health.
In addition, it should also be seen whether the furniture is covered with the factory-qualified chapter, and at the same time, the manufacturer must be identified and the invoice should be kept in order to meet the quality of the product, in addition to the manufacturer’s negotiations, but also with consumer associations or furniture. Contact the quality supervision and inspection station and ask them to help them properly.
Bait Station,Bird Feeder,Box Trap,Animal Snare
Hebei Liebang Metal Products Co.,Ltd , https://www.liebangtraptool.com