In recent years, in the printing and packaging industry, everyone can feel a new printing method-the flexographic printing press is coming to us with unprecedented strength. Flexo printing is uniquely flexible, economical, and environmentally friendly. He has been proven to be the "best and most promising printing method" in western developed countries. Since the 1980s, China has introduced a number of wide-width and narrow-width flexo printing machines. Due to the lack of understanding of flexographic printing and the limitations of some objective printing conditions, such as the lack of flexographic printing technology, flexo printing machines have not been available in China With full use and affirmation, Chinese people have never held an affirmative attitude towards flexographic printing. But this has not hindered the development of flexographic printing in China, and its vitality is continuously strengthened, technology is constantly improving, especially the entry of foreign flexographic technology has stimulated the attention of domestic people, and now flexo has developed in China .
But domestically, comparing flexo printing with other printing methods such as offset printing, silk screen printing, gravure printing, embossing printing, etc., everyone agrees that different people have different views, so flexo printing and offset printing A simple comparison. Some people say that flexo printing does not have a detailed offset printing effect. Some people say that the printing cost of flexo printing is too high for a printing factory that likes to change the label design. Suitable for prints in this respect, for those labels with high color requirements, the stability and environmental protection of flexo printing are worthy of recognition. In fact, among the various printing methods, each type of printing has its own advantages and disadvantages. Different printing units require different printing products.
At present, a very obvious development trend of packaging printing is to use combined printing, using the advantages of multiple printing methods to present the final product appearance. At present, advanced flexographic printing machines can add offset printing, gravure printing, flexo printing, and bronzing to printing. Any station of the machine can be very convenient and flexible to carry out a variety of printing process combinations. At present, this advanced printing process has been done by Canadian ETI (Yidi). In fact, it is no longer a simple flexo printing machine. It should be a combination printing machine.
ETI (Yidi) launched the high-performance combined flexo printing machine METRONOME, this unit-type flexo printing machine is able to achieve flexo, gravure, offset, silk screen, bronzing drawer quick change, and their quick change time It only takes 10 seconds to meet the perfect combination of multiple printing processes at one time. This technology and equipment are very advanced in China and even the world. The characteristics of ETI unit-type flexographic printing machines are: 1. Flexo printing Machine-based full servo drive S-drive, full UV drying, fully automatic registration system. 2. It can realize flexo printing, gravure printing, offset printing, silk printing, hot stamping drawer quick-change technology, only 10 seconds, and each printing unit can be selected according to customer needs. 3. Flexible printing methods, 12 micron film and 400 grams of cardboard can be flexibly converted to meet the printing needs of different materials. 4. Expansion type precise tension control TESS (from flexible packaging film printing). 5. It has advanced printing pressure pre-adjusting system SAPS, without any pressure adjustment, it can be printed after starting. 6. It can be configured with automatic roll fee and cut sheet unit.
In the traditional printing mode, one machine can only complete one to two printing units, and when other printing units are needed, the printing manufacturers can only go to the corresponding printing equipment, and some even leave the factory to let others help Doing this will undoubtedly increase costs and waste time, causing a lot of inconvenience. With ETI equipment, everything can be completed, and can provide guidance and technical upgrades for customers.
As a leading group in the history of printing, ETI (Yi Di) set up a factory in Shanghai, China, serving China and the Asia-Pacific region. Its arrival has filled the gap in the exchange of multiple printing units in the history of Chinese printing, and has been widely concerned by the industry With praise, he turned people's imagination of the future printing press into reality.
ETI (Yidi) is doing things practically every day, being serious and responsible, determined to serve every customer in China.
We not only provide Electric Height Adjustable Desk frame,we also provide Electric Lifting Column.You can buy it and assemble it yourself.
CONTUO have the ability to do the best service for their customers, with these special Height Adjustable Desk, CONTUO shows the invention capabilities, Innovation ability to their customers, they can do what they want to do, other Chinese suppliers don`t have such similar equipments like CONTUO. Electric Height Adjustable Desk , Hand Crank Desk , Standing Desk Converter, Movable Standing Desk , Lifting Column , TV Lift / Cart all need high-technology to produce, otherwise you can not do them well with high-quality. So, CONTUO spent many years on these lift technology, that`s why they have the biggest advantage on Quality & Prices ! Now many customers not only from the Abroad, but also from China local market are buying these Height Adjustable Desk from CONTUO. So, here on behalf of CONTUO, welcome all the customers from all over the world to do good business with us !
Tv Lift / Cart
Tv Lift,Tv Stand,Tv Lift Stand,Tv Lift Cabinet
Shaoxing contuo Transmission Technology Co.,Ltd , https://www.electricdesk.nl