The industry that generally uses salt spray test chambers: automotive parts, electroplating, coatings, electronic components, protective layers of metal materials, and salt spray corrosion tests of industrial products. Through an accelerated salt spray test method, different film thicknesses are obtained. The electrophoretic coatings of different parts and different structures are resistant to accelerated salt spray test, so that these easily corroded parts are identified and analyzed during the painting process, and corresponding protective measures are taken.
When we are doing salt spray corrosion test, we should add water to the insulation plate to prevent the salt spray from leaking, so as to avoid unnecessary trouble.
The defogging system of the salt spray test chamber is used to remove the salt spray in the test chamber during shutdown, prevent the corrosion gas from flowing out of other precision instruments in the corrosion test chamber, and accelerate the damage of other equipment. This is why the manufacturer recommends that the salt spray test chamber should be placed separately. If it is a large laboratory, you can also separate it separately. Do not open the lid to avoid salt spray overflow during the experiment. The laboratory should keep ventilation for a long time.
Tips: The salt spray test chamber should be cleaned regularly to maintain the pressure tank, salt water tank, nozzle of the test chamber and the sodium chloride solution. Do not manually pour water from the pressure tank, first clean the solution cylinder and add distilled water.
Hand Mask,Natural Hand Mask,Goat Milk Hand Mask,Nourishing Hand Mask
Guangzhou Shiruoni Cosmetics Co., Ltd. , https://www.shiruoni.com